Fluorescent paint for safety systems and evacuation signs

Fluorescent paint for safety systems and evacuation signs — Designed to create a glow-in-the-dark effect under ultraviolet light for evacuation signs, emergency exits, markings inside and outside buildings, and more. Under normal lighting conditions, the signs will display bright, attractive colors. The paint is moisture-resistant, and the finish is quite glossy. The paint contains a complex of polyurethane resins that ensure high adhesion to the specified surfaces.

Uses: Clean the surface of dust and dirt, then let it dry. Stir the paint thoroughly before use until it reaches a uniform consistency. It is recommended to apply 2–3 coats, allowing each coat to dry for 1–2 hours at room temperature before applying the next one.   Paint application method: Brush, roller, sponge, spray. You can check the evenness of the paint application using an ultraviolet lamp.

Paint coverage: 13 m²/L — for one coat (coverage depends on the application method)

The paint is not radioactive, non-toxic, and fire-safe.

Storing Paint: Store in a sealed container at a temperature of -20 ⁰From to +35⁰With "Keep Safe" technology for 3 years.

Packaging: 0.5 L, 1 L, 3 L, 5 L, 10 L.

Color:

White — white in daylight, with a blue-white glow under ultraviolet light
Red— red in daylight, red glow under ultraviolet light
Yellow — yellow in daylight, with a yellow glow under ultraviolet light
Orange — orange in daylight, with an orange glow under ultraviolet light
Blue — blue in daylight, blue glow under ultraviolet light
green — green in daylight, green glow under ultraviolet light
Pink — pink in daylight, with a pink glow under ultraviolet light
Dark pink — dark pink in daylight; under ultraviolet light, it glows dark pink